Re: new values for places and service [message #1757 is a reply to message #1750] |
Mon, 09 April 2018 16:23 |
Joerg von Lingen
Messages: 148 Registered: May 2011
|
Senior Member |
|
|
Thanks for your input. The additional attributes will be probably interesting
for other users as well. I will look for a good way to incorporate them into the
existing elements.
Best regards,
Joerg v. Lingen
Rollingstock Coordinator
On 05.04.2018 16:33, Torben Brand wrote:
> We need to define the following undefined values in the
> railML rolling stock schema for the use case capacity
> planning.
>
> The norwegian sector will use the already defined values in
> railML 2.3 in the wiki under <places> and <service>. We
> will also define the following "other:" values:
>
> Suggestion towards definition of <places> and <service> We
> define places as capacity of the vehicle. So a 1. class seat
> or a bed is a place, but a toilet, a seat in the restaurant
> car is a service as this is used in addition to a place.
> <places>@category=
>
> As the Forum does not support tables I had to restructure
> the list accordingly:
> railML value
> English short definition
> Norwegian name
> Comment
>
> class1
> Seating capacity of the vehicle, class1/comfort class
> Sitteplasser komfort/1.klasse
>
> class2
> Seating capacity of the vehicle, class2/standard
> Sitteplasser standard/2.klasse
>
> standing
> Number of people capacity of the vehicle, standing
> Ståplasser, antall. Klappseter i bruk
>
> other:standingArea
> capacity of the vehicle, standing room in square meters.
> Flip-up seats not in use.
> Ståplassareal, klappseter ikke i bruk
> Use <place> for now. Should be moved to an element
> describing technical characteristics of the
> <wagon/passanger> later.
>
> other:folding
> Flip-up seats (folding and resting). Folding seats are seats
> with dedicated area for the seat when it is folded down.
> Resting seats are in dedicated standing area (like
> entry/exit area)
> Klappseter (folde og klapp)
> We do not differentiate between folding and resting seats
> here.
>
> wheelchair
> Dedicated place(s) for wheelchair(s)
> Rullestolplasser
>
> bicycle
> Dedicated place(s) for bicyle(s)
> Sykkelplasser
> Use <place> for now, as already defined there. Should be
> moved to <service> to be conform to definition?
>
> bed
> Number of bed (s). Not differentiated in class.
> Soveplasser
>
> other:sleepingCompartment
> Number of sleeping compartments. Not differentiated in
> class.
> Sovekupeer
> TAF/TAP differentiates in class of compartment and number of
> beds in the compartment. Should be grouped somehow later.
>
> other:family
> capacity of seats in the vehicle in family compartment with
> family services like playroom and baby wagon storage
> area/places. Services not defined.
> Famileavdeling, antall sitteplasser
>
> other:restaurant
> Seating capacity in the restaurant/dining car
> Resturant (antall sitte plasser)
> Use <place> for now. Should be moved to <service> to be
> conform to definition?
>
>
> <service>@name=
>
> other:wheelchairLift
> Onboard Wheelchair lift
> Rullestolheis
> Separate code list for PRM in TAF/TAP. But this does not
> contain onboard wheel chair lift.
>
> other:toiletClosed
> toilet with closed sewer system
> Toalett (lukket system)
> Should be grouped later. Did not find any code list for
> toilets in TAF/TAP?
>
> other:toiletOpen
> toilet with open sewer system
> Toalett (lukket system)
>
> other:toiletHc
> toilet for impaired passengers
> Toalett (lukket system)
>
> other:Snack
> Kiosk (no seating)
> Betjent kiosk
>
> other:SelfService
> Food/drink vending machines
> Automat
>
> other:PIS
> Passenger information system
> Informasjonssystem
> Count:"1"=yes, Count:"0"=no or no value. Should be moved to
> an element describing technical characteristics of the
> <wagon/passanger> with bolean value later.
>
> other:WLAN
> WLAN/WiFi
> WiFi
> Count:"1"=yes, Count:"0"=no or no value. Should be moved to
> an element describing technical characteristics of the
> <wagon/passanger> with bolean value later.
>
> other:HVAC
> Heating, Ventilation and Air Conditioning
> HVAC for passasjerer
> Count:"1"=yes, Count:"0"=no or no value. Should be moved to
> an element describing technical characteristics of the
> <wagon/passanger> with bolean value later.
>
> other:APC
> Automatic passenger counting system
> APC
> Count:"1"=yes, Count:"0"=no or no value. Should be moved to
> an element describing technical characteristics of the
> <wagon/passanger> with bolean value later.
>
> other:SecurityCamera
> Security camera
> Trygghetskamera
> Count:"1"=yes, Count:"0"=no or no value. Should be moved to
> an element describing technical characteristics of the
> <wagon/passanger> with bolean value later.
>
> As <places> leans towards TSI TAF/TAP code list 9039 and
> service towards code list 7161 we have tried to use the
> existing name where they exist and seem logical. But we
> reccomnd a later through meeting to go through a logical
> structure of places and service as the definitions in railML
> and the TAF/TAP seems somewhat incoherrent.
>
|
|
|