Home » railML newsgroups » railml.timetable » RailML semantics, nextdeparture, recurringschedule
RailML semantics, nextdeparture, recurringschedule [message #723] |
Fri, 06 May 2011 09:02 ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
Greetings to RailML community!
This is my first post to the forum so I will start with a introduction. I
am a Software Design Engineer with strong Java/C++ programming/design
background. I am currently working for Finnish company called Mitron Oy.
We have headquarters in Forssa/Finland and other offices in
Tampere/Finland, Mittenaar/Germany and Warszawa/Poland. Mitron focuses on
passenger information, display, entertainment, announcement and security
systems for trains, trams, subways, stops, stations and platforms. More
information about company can be found from www.mitron.com and I am happy
to answer further queries about me or the company.
Within Mitron we have ongoing discussion about RailML and I have now been
studying it from technical perspective. Goal of this study is to make
decision about our commitment to RailML and what our role would be.
During this technical investigation I have had some difficulties related
to the semantic specification explained (or more accurately not explained)
in the RailML wiki pages.
I have so many questions about the semantics, but I have to start from
somewhere so here it goes:
We have thing called "Departure" which I think is close to
timetable->trains->train in RailML. Our departure knows route and
timetable for the route for example. Departure knows also list of possible
next Departures that might come next from the terminal station of first
departure. What would be the place in RailML to get that information? Is
the circulations/rostering/blocks semantically identical to this? Does the
block mean part of train or part of track as an example? I have tried to
figure out the semantical relations of those mentioned RailML elements,
but without documentation in wiki it has proved difficult.
Other thing I don't quite get, even though it is mentioned in wiki is
relation between operatingpediod->operatingday->operatingcode->bitmask and
operatingperiod->bitmask and operatingdaydeviance and holiday and
specialservice. Which one overrides which? Why there are period bitmask
separately from week bitmask and then deviances and holidays?
What is ocpTT->sectionTT->distance. Distance from where to where? Is this
in relation to infrasructures
track->tracktopology->trackBegin/trackEnd->pos -attribute? If I would like
to know distance of two stations along the track/line what is the correct
place?
With Kindest Regards,
Mr. Tuomas Tiihonen
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #724 is a reply to message #723] |
Tue, 10 May 2011 10:28 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
Joachim Rubröder railML
Messages: 0 Registered: November 2019
|
|
|
|
Dear Tuomas,
I'm not sure if I understand right, what you mean by your "Departure".
Could you please describe this a little bit more in detail?
Here is some rough explanation about the railML basics you mentioned for
clarification:
> timetable->trains->train
If your dealing with passenger information, your "train" will probably be
with type="commercial" and correspond to the train, a passenger is used
to. A train with type="operational" in comparance is a train considered by
a signal box, which is mostly but not necessary the same kind of train.
> circulations/rostering/blocks
The blocks are describing the routine of the day for a specific piece of
rollingstock. This could be within diffferent trains and could include
empty rides before starting the routine for the following day which is
described in the next block.
> operatingperiod->bitmask
This is a bitmask for every day of a timetable period, decribing if the
train is running on this specific day.
> operatingperiod->operatingday->operatingcode->bitmask
This is a different more generic way of describing, like "running Mondays
to Fridays only" with a week based bitmask. This is valid for any week
with some further described deviances.
> ocpTT->sectionTT->distance
Is the running distance between one ocpTT within the path of a train and
the next ocpTT for this train. This information is redundand and could be
calculated by
> track->tracktopology->trackBegin/trackEnd->pos
wich is the correct length of a single track between two switches in a
microscopic view.
But if you consider track/Begin/trackEnd as macrosscopic nodes
corresponding to stations, then you will get the same result:
> ocpTT->sectionTT->distance (running distance for the train between stations)
> track->tracktopology->trackBegin/trackEnd->pos (macroscopic infrastructure
distance between stations)
I hope this will clear up intentions behind the complex structures of
railML a little bit.
Kind regards
Joachim
Tuomas Tiihonen wrote:
>
> Greetings to RailML community!
>
> This is my first post to the forum so I will start with a introduction. I
> am a Software Design Engineer with strong Java/C++ programming/design
> background. I am currently working for Finnish company called Mitron Oy.
> We have headquarters in Forssa/Finland and other offices in
> Tampere/Finland, Mittenaar/Germany and Warszawa/Poland. Mitron focuses on
> passenger information, display, entertainment, announcement and security
> systems for trains, trams, subways, stops, stations and platforms. More
> information about company can be found from www.mitron.com and I am happy
> to answer further queries about me or the company.
>
> Within Mitron we have ongoing discussion about RailML and I have now been
> studying it from technical perspective. Goal of this study is to make
> decision about our commitment to RailML and what our role would be.
>
> During this technical investigation I have had some difficulties related
> to the semantic specification explained (or more accurately not explained)
> in the RailML wiki pages.
>
> I have so many questions about the semantics, but I have to start from
> somewhere so here it goes:
>
> We have thing called "Departure" which I think is close to
> timetable->trains->train in RailML. Our departure knows route and
> timetable for the route for example. Departure knows also list of possible
> next Departures that might come next from the terminal station of first
> departure. What would be the place in RailML to get that information? Is
> the circulations/rostering/blocks semantically identical to this? Does the
> block mean part of train or part of track as an example? I have tried to
> figure out the semantical relations of those mentioned RailML elements,
> but without documentation in wiki it has proved difficult.
>
> Other thing I don't quite get, even though it is mentioned in wiki is
> relation between operatingpediod->operatingday->operatingcode->bitmask and
> operatingperiod->bitmask and operatingdaydeviance and holiday and
> specialservice. Which one overrides which? Why there are period bitmask
> separately from week bitmask and then deviances and holidays?
>
> What is ocpTT->sectionTT->distance. Distance from where to where? Is this
> in relation to infrasructures
> track->tracktopology->trackBegin/trackEnd->pos -attribute? If I would like
> to know distance of two stations along the track/line what is the correct
> place?
>
> With Kindest Regards,
> Mr. Tuomas Tiihonen
>
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #725 is a reply to message #724] |
Tue, 10 May 2011 13:52 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
> I'm not sure if I understand right, what you mean by your "Departure".
> Could you please describe this a little bit more in detail?
Departure is concept in our system that knows following things:
trainnumber, vehicle type, route (route is ordered list of stations ~
OCPsTT), departureTime, other driving times (times when it arrives to
other stations) AND next possible departures. So it is one train that goes
around some route with specified times and with specified vehicle with
unique train number. It sounds something like commercial train in RailML?
And the question was that, when one of such departures has ran from the
beginning of the route to the end of the route it is time to make decision
about the next departure.
Example:
Departure 1 goes route: city1-city2-city3
Departure 2 goes route: city3-city4-city5
Departure 3 goes route: city3-city4-city1
Departure 4 goes route: city5-city1-city2
Train 1 has ran departure 1 and are now in city 3. Now choice has to be
made if next departure is departure 2 or 3 (both starts from city 3 and
departure time is near the current time). Departure 4 is not one of the
choices as it is not starting from city 3. The departure 1 knows the list
of possible next departures (departure 2 and 3 in the example).
If all this is applied to RailML can you consider this:
Is the commercial train equivalent to Departure in RailML?
If the train is equivalent how can one train get list of next trains
(=next departures)? in RailML?
>> operatingperiod->bitmask
> This is a bitmask for every day of a timetable period, decribing if the
> train is running on this specific day.
>
>> operatingperiod->operatingday->operatingcode->bitmask
> This is a different more generic way of describing, like "running Mondays
> to Fridays only" with a week based bitmask. This is valid for any week
> with some further described deviances.
Can you please clarify the relations of the bitmasks. Which one overrides
which?
> I hope this will clear up intentions behind the complex structures of
> railML a little bit.
Thank you for the clarifications so far, great help!
Sincerely,
Tuomas Tiihonen
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #726 is a reply to message #725] |
Tue, 10 May 2011 14:51 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
Joachim Rubröder railML
Messages: 0 Registered: November 2019
|
|
|
|
Hello Tuomas,
> Departure is concept in our system that knows following things:
> trainnumber, vehicle type, route (route is ordered list of stations ~
> OCPsTT), departureTime, other driving times (times when it arrives to
> other stations)
This is like what we call in railML a trainPart.
A train (either "operational" or "commercial") is a combination of such
trainParts with a certain trainnumber. Such a train could change part of
its vehicles on an intermediate station A "commercial" train with its
trainNumber could be shown by a passenger information or in a public
timetable.
> Departure 1 goes route: city1-city2-city3
> Departure 2 goes route: city3-city4-city5
> Departure 3 goes route: city3-city4-city1
> Departure 4 goes route: city5-city1-city2
The possible "next departures" in city3 in your sense could be either a
"connection" in railML. Then its meant like a passenger information in
city3 : "Passengers for city5 should change to the train Departure 5".
Or maybe its like in the planning process for a rostering. Then the
vehicles of Departure1 could be further used in Departure2 or Departure3.
Then your departures are corresponding to blockParts which are referencing
trainParts. The result of the decision process in your programm (take
Departure2 after Departure1) will lead to a "block" in railML that is used
as part of a vehicle circulation.
Anyway, all possible trainParts could be listed in railML and they don't
know about each other. The chosen connection (for passengers -> conection
or vehicles -> block) between trainParts is the result of a planning
process.
The two bitmasks are not in competition but two different models. If you
have an operational system, you are familiar with the
operatingperiod->bitmask for every day. Other systems for conceptional
planning purposes deal with a standard week and the
operatingperiod->operatingday->operatingcode->bitmask.
Kind regards,
Joachim
Tuomas Tiihonen wrote:
>
>
>> I'm not sure if I understand right, what you mean by your "Departure".
>> Could you please describe this a little bit more in detail?
>
> Departure is concept in our system that knows following things:
> trainnumber, vehicle type, route (route is ordered list of stations ~
> OCPsTT), departureTime, other driving times (times when it arrives to
> other stations) AND next possible departures. So it is one train that goes
> around some route with specified times and with specified vehicle with
> unique train number. It sounds something like commercial train in RailML?
>
> And the question was that, when one of such departures has ran from the
> beginning of the route to the end of the route it is time to make decision
> about the next departure.
> Example:
> Departure 1 goes route: city1-city2-city3
> Departure 2 goes route: city3-city4-city5
> Departure 3 goes route: city3-city4-city1
> Departure 4 goes route: city5-city1-city2
> Train 1 has ran departure 1 and are now in city 3. Now choice has to be
> made if next departure is departure 2 or 3 (both starts from city 3 and
> departure time is near the current time). Departure 4 is not one of the
> choices as it is not starting from city 3. The departure 1 knows the list
> of possible next departures (departure 2 and 3 in the example).
>
> If all this is applied to RailML can you consider this:
> Is the commercial train equivalent to Departure in RailML?
> If the train is equivalent how can one train get list of next trains
> (=next departures)? in RailML?
>
>
>>> operatingperiod->bitmask
>> This is a bitmask for every day of a timetable period, decribing if the
>> train is running on this specific day.
>>
>>> operatingperiod->operatingday->operatingcode->bitmask
>> This is a different more generic way of describing, like "running Mondays
>> to Fridays only" with a week based bitmask. This is valid for any week
>> with some further described deviances.
>
> Can you please clarify the relations of the bitmasks. Which one overrides
> which?
>
>
>> I hope this will clear up intentions behind the complex structures of
>> railML a little bit.
>
> Thank you for the clarifications so far, great help!
>
> Sincerely,
> Tuomas Tiihonen
>
>
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #727 is a reply to message #726] |
Wed, 11 May 2011 08:47 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
Hi,
> The possible "next departures" in city3 in your sense could be either a
> "connection" in railML. Then its meant like a passenger information in
> city3 : "Passengers for city5 should change to the train Departure 5".
>
> Or maybe its like in the planning process for a rostering. Then the
> vehicles of Departure1 could be further used in Departure2 or Departure3.
> Then your departures are corresponding to blockParts which are referencing
> trainParts. The result of the decision process in your programm (take
> Departure2 after Departure1) will lead to a "block" in railML that is used
> as part of a vehicle circulation.
>
> Anyway, all possible trainParts could be listed in railML and they don't
> know about each other. The chosen connection (for passengers -> conection
> or vehicles -> block) between trainParts is the result of a planning
> process.
Our Next departure is used by the driver of the train. So after driver
finishes one departure the driver can choose next departure for the train
he/she is currently driving. If I understand correctly it is perhaps the
vehicle->block closer to this.
> The two bitmasks are not in competition but two different models. If you
> have an operational system, you are familiar with the
> operatingperiod->bitmask for every day. Other systems for conceptional
> planning purposes deal with a standard week and the
> operatingperiod->operatingday->operatingcode->bitmask.
Oh, ok. That clarifies it a bit. We have to choose which way we have to
define the days in which context.
Thank you again for the answers!
Br,
Tuomas
> Tuomas Tiihonen wrote:
>>
>>
>>> I'm not sure if I understand right, what you mean by your "Departure".
>>> Could you please describe this a little bit more in detail?
>>
>> Departure is concept in our system that knows following things:
>> trainnumber, vehicle type, route (route is ordered list of stations ~
>> OCPsTT), departureTime, other driving times (times when it arrives to
>> other stations) AND next possible departures. So it is one train that goes
>> around some route with specified times and with specified vehicle with
>> unique train number. It sounds something like commercial train in RailML?
>>
>> And the question was that, when one of such departures has ran from the
>> beginning of the route to the end of the route it is time to make decision
>> about the next departure.
>> Example:
>> Departure 1 goes route: city1-city2-city3
>> Departure 2 goes route: city3-city4-city5
>> Departure 3 goes route: city3-city4-city1
>> Departure 4 goes route: city5-city1-city2
>> Train 1 has ran departure 1 and are now in city 3. Now choice has to be
>> made if next departure is departure 2 or 3 (both starts from city 3 and
>> departure time is near the current time). Departure 4 is not one of the
>> choices as it is not starting from city 3. The departure 1 knows the list
>> of possible next departures (departure 2 and 3 in the example).
>>
>> If all this is applied to RailML can you consider this:
>> Is the commercial train equivalent to Departure in RailML?
>> If the train is equivalent how can one train get list of next trains
>> (=next departures)? in RailML?
>>
>>
>>>> operatingperiod->bitmask
>>> This is a bitmask for every day of a timetable period, decribing if the
>>> train is running on this specific day.
>>>
>>>> operatingperiod->operatingday->operatingcode->bitmask
>>> This is a different more generic way of describing, like "running Mondays
>>> to Fridays only" with a week based bitmask. This is valid for any week
>>> with some further described deviances.
>>
>> Can you please clarify the relations of the bitmasks. Which one overrides
>> which?
>>
>>
>>> I hope this will clear up intentions behind the complex structures of
>>> railML a little bit.
>>
>> Thank you for the clarifications so far, great help!
>>
>> Sincerely,
>> Tuomas Tiihonen
>>
>>
>
>
>
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #728 is a reply to message #727] |
Wed, 11 May 2011 10:09 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
Joachim Rubröder railML
Messages: 0 Registered: November 2019
|
|
|
|
Hi Tuomas,
> Our Next departure is used by the driver of the train. So after driver
> finishes one departure the driver can choose next departure for the train
> he/she is currently driving. If I understand correctly it is perhaps the
> vehicle->block closer to this.
now we're getting closer. If the train driver chooses the next departure
its probably kind of a service plan for train drivers. This is not yet
implemented in railML but very similar to the rostering structure, wich is
a service plan for vehicles. The problem with the train drivers is that
they are much more complex (different skills, payment, pause times, ...)
to deal with.
Sincerely,
Joachim
T wrote:
>
> Hi,
>
>> The possible "next departures" in city3 in your sense could be either a
>> "connection" in railML. Then its meant like a passenger information in
>> city3 : "Passengers for city5 should change to the train Departure 5".
>>
>> Or maybe its like in the planning process for a rostering. Then the
>> vehicles of Departure1 could be further used in Departure2 or Departure3.
>> Then your departures are corresponding to blockParts which are referencing
>> trainParts. The result of the decision process in your programm (take
>> Departure2 after Departure1) will lead to a "block" in railML that is used
>> as part of a vehicle circulation.
>>
>> Anyway, all possible trainParts could be listed in railML and they don't
>> know about each other. The chosen connection (for passengers -> conection
>> or vehicles -> block) between trainParts is the result of a planning
>> process.
>
> Our Next departure is used by the driver of the train. So after driver
> finishes one departure the driver can choose next departure for the train
> he/she is currently driving. If I understand correctly it is perhaps the
> vehicle->block closer to this.
>
>> The two bitmasks are not in competition but two different models. If you
>> have an operational system, you are familiar with the
>> operatingperiod->bitmask for every day. Other systems for conceptional
>> planning purposes deal with a standard week and the
>> operatingperiod->operatingday->operatingcode->bitmask.
>
> Oh, ok. That clarifies it a bit. We have to choose which way we have to
> define the days in which context.
>
>
> Thank you again for the answers!
>
> Br,
> Tuomas
>
>
>
>> Tuomas Tiihonen wrote:
>>>
>>>
>>>> I'm not sure if I understand right, what you mean by your "Departure".
>>>> Could you please describe this a little bit more in detail?
>>>
>>> Departure is concept in our system that knows following things:
>>> trainnumber, vehicle type, route (route is ordered list of stations ~
>>> OCPsTT), departureTime, other driving times (times when it arrives to
>>> other stations) AND next possible departures. So it is one train that
goes
>>> around some route with specified times and with specified vehicle with
>>> unique train number. It sounds something like commercial train in RailML?
>>>
>>> And the question was that, when one of such departures has ran from the
>>> beginning of the route to the end of the route it is time to make
decision
>>> about the next departure.
>>> Example:
>>> Departure 1 goes route: city1-city2-city3
>>> Departure 2 goes route: city3-city4-city5
>>> Departure 3 goes route: city3-city4-city1
>>> Departure 4 goes route: city5-city1-city2
>>> Train 1 has ran departure 1 and are now in city 3. Now choice has to be
>>> made if next departure is departure 2 or 3 (both starts from city 3 and
>>> departure time is near the current time). Departure 4 is not one of the
>>> choices as it is not starting from city 3. The departure 1 knows the list
>>> of possible next departures (departure 2 and 3 in the example).
>>>
>>> If all this is applied to RailML can you consider this:
>>> Is the commercial train equivalent to Departure in RailML?
>>> If the train is equivalent how can one train get list of next trains
>>> (=next departures)? in RailML?
>>>
>>>
>>>> > operatingperiod->bitmask
>>>> This is a bitmask for every day of a timetable period, decribing if the
>>>> train is running on this specific day.
>>>>
>>>> > operatingperiod->operatingday->operatingcode->bitmask
>>>> This is a different more generic way of describing, like "running
Mondays
>>>> to Fridays only" with a week based bitmask. This is valid for any week
>>>> with some further described deviances.
>>>
>>> Can you please clarify the relations of the bitmasks. Which one overrides
>>> which?
>>>
>>>
>>>> I hope this will clear up intentions behind the complex structures of
>>>> railML a little bit.
>>>
>>> Thank you for the clarifications so far, great help!
>>>
>>> Sincerely,
>>> Tuomas Tiihonen
>>>
>>>
>>
>>
>>
>
>
>
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #729 is a reply to message #728] |
Wed, 11 May 2011 14:01 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
Joachim Rubröder wrote:
>
> Hi Tuomas,
>
>> Our Next departure is used by the driver of the train. So after driver
>> finishes one departure the driver can choose next departure for the train
>> he/she is currently driving. If I understand correctly it is perhaps the
>> vehicle->block closer to this.
>
> now we're getting closer. If the train driver chooses the next departure
> its probably kind of a service plan for train drivers. This is not yet
> implemented in railML but very similar to the rostering structure, wich is
> a service plan for vehicles. The problem with the train drivers is that
> they are much more complex (different skills, payment, pause times, ...)
> to deal with.
>
Hi Joachim,
actually the next departure is not related to the driver in our system.
Driver is just the user who selects the next departure from the system. So
in this context there is no need to know any information about the driver,
or even who is the driver or even if there is the driver :)
As driver is the user of the information he/she needs to know the next
departures for the train he/she is sitting in not for driver itself.
You can imagine that the train intelligently answers driver's question:
"Dear train, please tell me all possible next departures where you, train,
can depart from this exact station we are currently at"
After this question train would generate this information, hopefully from
railml by searching next departures from last driven departure. Or in
railml next block from last driven block?
Br,
Tuomas
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #730 is a reply to message #728] |
Wed, 11 May 2011 14:01 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
Joachim Rubröder wrote:
>
> Hi Tuomas,
>
>> Our Next departure is used by the driver of the train. So after driver
>> finishes one departure the driver can choose next departure for the train
>> he/she is currently driving. If I understand correctly it is perhaps the
>> vehicle->block closer to this.
>
> now we're getting closer. If the train driver chooses the next departure
> its probably kind of a service plan for train drivers. This is not yet
> implemented in railML but very similar to the rostering structure, wich is
> a service plan for vehicles. The problem with the train drivers is that
> they are much more complex (different skills, payment, pause times, ...)
> to deal with.
>
Hi Joachim,
actually the next departure is not related to the driver in our system.
Driver is just the user who selects the next departure from the system. So
in this context there is no need to know any information about the driver,
or even who is the driver or even if there is the driver :)
As driver is the user of the information he/she needs to know the next
departures for the train he/she is sitting in not for driver itself.
You can imagine that the train intelligently answers driver's question:
"Dear train, please tell me all possible next departures where you, train,
can depart from this exact station we are currently at"
After this question train would generate this information, hopefully from
railml by searching next departures from last driven departure. Or in
railml next block from last driven block?
Br,
Tuomas
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #731 is a reply to message #729] |
Wed, 11 May 2011 16:58 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
Joachim Rubröder railML
Messages: 0 Registered: November 2019
|
|
|
|
Dear Tuomas,
this is a very strange and interesting concept.
A passenger would ask a timetable: "When leaves the next train from here
to xy?"
(-> connection)
A train driver could ask the vehicle: "Where are you supposed to go next?"
(-> blocks)
Anyone could ask a railway map: "Where could I go from this station?"
(-> infrastructure)
A commercial train could be asked: "What is published as your next
station?"
(-> train)
A train driver could ask the train: "What is our next station in the
timetable?"
(-> train)
What is the use case for the choice?
Why is the train driver asking such a question?
Train drivers and vehicles usually have their fixed service plans and the
physical trains have their fixed timetable to fulfill - there is no choice.
Your train drivers question sounds like a taxi driver asking about
possible further rides. Maybe it is the train asking "where shall we go
on?" by providing a list of possibilities (-> operational trains) with a
filter function. Then the train driver would choose the correct one,
because he knows it. But I would assume that a train driver would type in
the train number and the train searches in a given in a timetable where to
go next.
Kind regards,
Joachim
Tuomas Tiihonen wrote:
>
> Joachim Rubröder wrote:
>>
>> Hi Tuomas,
>>
>>> Our Next departure is used by the driver of the train. So after driver
>>> finishes one departure the driver can choose next departure for the train
>>> he/she is currently driving. If I understand correctly it is perhaps the
>>> vehicle->block closer to this.
>>
>> now we're getting closer. If the train driver chooses the next departure
>> its probably kind of a service plan for train drivers. This is not yet
>> implemented in railML but very similar to the rostering structure, wich is
>> a service plan for vehicles. The problem with the train drivers is that
>> they are much more complex (different skills, payment, pause times, ...)
>> to deal with.
>>
>
> Hi Joachim,
>
> actually the next departure is not related to the driver in our system.
> Driver is just the user who selects the next departure from the system. So
> in this context there is no need to know any information about the driver,
> or even who is the driver or even if there is the driver :)
>
> As driver is the user of the information he/she needs to know the next
> departures for the train he/she is sitting in not for driver itself.
>
> You can imagine that the train intelligently answers driver's question:
> "Dear train, please tell me all possible next departures where you, train,
> can depart from this exact station we are currently at"
>
> After this question train would generate this information, hopefully from
> railml by searching next departures from last driven departure. Or in
> railml next block from last driven block?
>
> Br,
> Tuomas
>
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #732 is a reply to message #731] |
Thu, 12 May 2011 15:22 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
Hi Joachim,
Joachim Rubröder wrote:
> Your train drivers question sounds like a taxi driver asking about
> possible further rides. Maybe it is the train asking "where shall we go
> on?" by providing a list of possibilities (-> operational trains) with a
> filter function. Then the train driver would choose the correct one,
> because he knows it. But I would assume that a train driver would type in
> the train number and the train searches in a given in a timetable where to
> go next.
Heureka! Sorry for misleading you. I think that is closest so far. That
the _train_ not the driver is asking "where shall we go on?" And the
driver then answers, by either inputting trainnumber, or choose from given
_list of possibilities_ or search. After the train gets its answer
(Departure), it will use that information to display e.g. route correctly
in the displays.
This matches our concept, except this is thought in commercial perspective
rather than operational.
So how the commercial train would know the next commercial train that
leaves the end station? Is that only by crawling through list of trains or
is there ordered list (under rostering, circulation?)..
Br,
Tuomas
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #733 is a reply to message #732] |
Fri, 20 May 2011 10:08 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) ![Go to next message Go to next message](/forum/theme/default/images/down.png) |
Joachim Rubröder railML
Messages: 0 Registered: November 2019
|
|
|
|
Hi Tuomas,
> Heureka! Sorry for misleading you. I think that is closest so far. That
> the _train_ not the driver is asking "where shall we go on?" And the
> driver then answers, by either inputting trainnumber, or choose from given
> _list of possibilities_ or search. After the train gets its answer
> (Departure), it will use that information to display e.g. route correctly
> in the displays.
OK, let us assume there is a railML timetable (on the system in the train)
and the train knows where it is (station xy). The train needs to know
where to gon for displaying (->commercial perspective).
- the train driver types in the trainNumber (train searches the related
commercial "train" acoording to the trainNumber)
- train lists all "trainParts" starting at xy and train driver chooses one
then the train searches the related commercial train according to the
trainPart references)
The timetable gives a full overview over all trains. There is no special
list sorted by stations. So it is necessary to search the list of trains
or trainParts.
Kind regards,
Joachim
Tuomas Tiihonen wrote:
>
> Hi Joachim,
>
> Joachim Rubröder wrote:
>> Your train drivers question sounds like a taxi driver asking about
>> possible further rides. Maybe it is the train asking "where shall we go
>> on?" by providing a list of possibilities (-> operational trains) with a
>> filter function. Then the train driver would choose the correct one,
>> because he knows it. But I would assume that a train driver would type in
>> the train number and the train searches in a given in a timetable where to
>> go next.
>
> Heureka! Sorry for misleading you. I think that is closest so far. That
> the _train_ not the driver is asking "where shall we go on?" And the
> driver then answers, by either inputting trainnumber, or choose from given
> _list of possibilities_ or search. After the train gets its answer
> (Departure), it will use that information to display e.g. route correctly
> in the displays.
>
> This matches our concept, except this is thought in commercial perspective
> rather than operational.
>
> So how the commercial train would know the next commercial train that
> leaves the end station? Is that only by crawling through list of trains or
> is there ordered list (under rostering, circulation?)..
>
> Br,
> Tuomas
>
>
>
--
----== posted via PHP Headliner ==----
|
|
|
Re: RailML semantics, nextdeparture, recurringschedule [message #734 is a reply to message #733] |
Mon, 23 May 2011 07:46 ![Go to previous message Go to previous message](/forum/theme/default/images/up.png) |
tuomas.tiihonen
Messages: 15 Registered: May 2011
|
Junior Member |
|
|
Hi Joachim,
I think this answers my question, thank you! Thank you also for the
patience :)
Br,
Tuomas
>> Heureka! Sorry for misleading you. I think that is closest so far. That
>> the _train_ not the driver is asking "where shall we go on?" And the
>> driver then answers, by either inputting trainnumber, or choose from given
>> _list of possibilities_ or search. After the train gets its answer
>> (Departure), it will use that information to display e.g. route correctly
>> in the displays.
>
> OK, let us assume there is a railML timetable (on the system in the train)
> and the train knows where it is (station xy). The train needs to know
> where to gon for displaying (->commercial perspective).
> - the train driver types in the trainNumber (train searches the related
> commercial "train" acoording to the trainNumber)
> - train lists all "trainParts" starting at xy and train driver chooses one
> then the train searches the related commercial train according to the
> trainPart references)
>
> The timetable gives a full overview over all trains. There is no special
> list sorted by stations. So it is necessary to search the list of trains
> or trainParts.
>
> Kind regards,
> Joachim
--
----== posted via PHP Headliner ==----
|
|
|
Goto Forum:
Current Time: Sun Aug 25 02:40:16 CEST 2024
|