Vertical track geometry [message #1370] |
Tue, 21 June 2016 16:24 |
iruldacunha
Messages: 6 Registered: June 2016
|
Junior Member |
|
|
Hello,
Does anyone have an idea on how to represent a vertical track geometry? For example, in LandXML, there is section of tracks represented as follow:
<Alignment name="POINT P" length="10729.999981" staStart="9635.000000" desc="">
<CoordGeom>
<Line dir="118.260597" length="0.000001">
<Start>6688142.924053 524155.814846</Start>
<End>6688142.924053 524155.814847</End>
</Line>
<Spiral length="183.094296" radiusEnd="5560.000000" radiusStart="17010.382141" rot="ccw" spiType="clothoid" theta="0.458086">
<Start>6688142.924053 524155.814847</Start>
<PI>6688048.650193 524105.137203</PI>
<End>6687980.877100 524070.591900</End>
</Spiral>
<Curve rot="ccw" length="1222.615288" crvType="arc" radius="5560.000000">
<Start>6687980.877100 524070.591900</Start>
<Center>6685455.924700 529024.198200</Center>
<End>6686839.561929 523639.112483</End>
</Curve>
</CoordGeom>
</Alignment>
--
Illan RUL-DA CUNHA
Stagiaire étude et développement
DTE DOP, pôle BIM
72-74 rue Henry Farman • 75015 Paris • France
www.systra.com
[Updated on: Sat, 11 February 2017 20:53] by Moderator Report message to a moderator
|
|
|